WDM & OTN Solutions
WDM & OTN Solutions
1U Rack Chasis for 200G/400G CFP2 Muxponder
4-slots 400G CFP2 Muxponder, 16*100G, total 1.6T Transmission 1U Rack Chassis Product Features Max support 16x100G for client side, 8x200G or 4x400G for line side in transmission. Total max is 1.6Tbps(3.2Tbps on bidirectional) in 1U device. Achieve higher transfer capacity...
$1,599.00
4x100G QSFP28 to 2x 200Gbps CFP2 Muxponder
4x100G QSFP28 to 2x 200Gbps CFP2 Muxponder The 200G Muxponder supports mapping 4x100G optical signals received on the client side into 2 OTUC2 signals and interconverting OTUC2 signals with optical signals of WDM wavelengths conforming to ITU-T standards. The line...
$2,899.00
10x 10G SFP+ and 1x100G QSFP28 to 200Gbps CFP2 Muxponder
10x 10G SFP+ and 1x100G QSFP28 to 200Gbps CFP2 Muxponder The 200G Muxponder supports mapping 2x100G optical signals or 1x100G+10x10G optical signals received on the client side to 1 OTUC2 signal and interconverting OTUC2 signals with optical signals of WDM...
$2,699.00
4x 100G QSFP28 to 1x 400G CFP2 Muxponder
4*100G QSFP28 to 1*400G CFP2 muxponder board is used for fiber link 400G business access board, can realize 4*QSFP28 100G conversion CFP2 400G, CFP2 coherent optical module wavelength adjustable, cooperate with DWDM multiplexer/demultiplexer to realize wave Division multiplexing transmission provides...
$2,999.00
8 Channel DWDM Mux/Demux OSP Cassette 100x80x10mm
DWDM, Single (Mux or Demux), Any 8 of 100GHz ITU Grid C21~C60, Outdoor cassette ABS (100x80x10mm), 900um 1.5m pigtail with label, Thin Film Filter Technology The 8-channels 100Ghz DWDM Mux or Demux is a low loss, high density passive optical...
$193.80
Dual 8 channels DWDM Mux/Demux with GPON/XGS-PON/OTDR ch21-28 LC/APC LGX
2x Co-existence GPON/XGS-PON/OTDR PON WDM module with Dual Fiber DWDM Mux/Demux, 8 Channel ITU CH21-CH28, LC/APC, Industrial Standard LGX Module Coexistence Element (CEx) is a passive PON WDM modules used to combine GPON with XGS-PON, NG-PON2, OTDR and RF-video/CATV traffic...
$670.00
Multi-Service OTN6500 Platform Compact 1U 2U 5U Rack WDM System
The OTN6500 optical transmission network system, which is mainly used in metro convergence layer and metro core layer, is a new generation of optical transmission system with high integration, high capacity, and long-distance. The equipment applies advanced transmission technology and...
from $350.00
OTN6500 25dB Gain DWDM EDFA Pre-Amplifier 16dBm Output
What is EDFA Amplifier?Erbium-Doped Fiber Amplifier (EDFA) is an optical amplifier used in the C-band and L-band, where the loss of telecom optical fibers becomes lowest in the entire optical telecommunication wavelength bands. Invented in 1987, EDFA is now most...
from $1,499.00
OTN6500 25dB Gain DWDM EDFA Line Amplifier 20dBm Output
What is EDFA Amplifier?Erbium-Doped Fiber Amplifier (EDFA) is an optical amplifier used in the C-band and L-band, where the loss of telecom optical fibers becomes lowest in the entire optical telecommunication wavelength bands. Invented in 1987, EDFA is now most...
from $1,499.00
OTN6500 17dB Gain DWDM EDFA Booster Amplifier 20dBm Output
What is EDFA Amplifier?Erbium-Doped Fiber Amplifier (EDFA) is an optical amplifier used in the C-band and L-band, where the loss of telecom optical fibers becomes lowest in the entire optical telecommunication wavelength bands. Invented in 1987, EDFA is now most...
from $1,499.00
OTN6500 OLP Optical Line Protection Card Board for DWDM Network
What is Optical Line Protection?An optical line protection system (OLP) uses vacant optical fiber from different routes to build a backup path. by real-time monitoring the power status in working fiber, it can automatically switch from working fiber to backup...
$499.00
OTN6500 TDC Tunable Dispersion Compensation Card up to 120km 2100 ps/nm
OTN6500 TDC (tunable dispersion compensator) card is mainly used for dispersion compensation of high-speed transmission systems. It can accurately manage the residual dispersion after segmented fixed optical compensation and provide a flexible and accurate solution for dispersion compensation. This Tunable...
$2,600.00
OTN6500 1x 100G QSFP28 to 1x 100G CFP Coherent DWDM OTU4 Transponder
What is OTU Transponder?Transponders are used to enable point-to-point connections over long distances when the client rate matches the optical wavelength. In cases where the client rates are lower than the optical wavelength.What is Muxponder?A muxponder is the element that...
$2,516.00
OTN6500 10G/25G SFP+ SFP28 CWDM DWDM OTN Transponder
What is OTU Transponder?Transponders are used to enable point-to-point connections over long distances when the client rate matches the optical wavelength. In cases where the client rates are lower than the optical wavelength.What is Muxponder?A muxponder is the element that...
from $699.00
OTN6500 200G CFP2 Muxponders 2x 100G QSFP28 to 1x 200G CFP2 OTU4
The 200G CFP2 Muxponder board supports 2x100G QSFP28 to 200G CFP2 electrical layer multiplexing / demultiplexing and is converted into a 200G rate WDM standard wavelength optical signal so that the multiplexing unit can deal with different wavelengths of light....
$2,599.00
OTN6500 2 channels 40G/100G OTU 4x QSFP28 QSFP+ Transponders
This 40G & 100G Transponder is to perform 3R regeneration of two 40G or 100G service signals that are accessed and can be transformed into two DWDM standard wavelength optical signals so that the multiplexer unit performs wavelength division multiplexing...
$2,051.00
16 channels DWDM MUX DEMUX 1U 19'' Racks
16 channel DWDM Mux is designed by LightOptics® to allow easy, gradual, logical and cost efficient expansion of network bandwidth using industry leading passive WDM technology. Main advantage of DWDM Mux Demux is its passive nature – no power supply...
$610.00
40 channels DWDM MUX DEMUX 1U 19'' Racks CH21-CH60 Dual Fiber AAWG
The 40 channel DWDM Mux is a passive optical multiplexer/demultiplexer designed for metro access applications that represent the state of the art in fiber optics design. This passive DWDM Mux Demux module multiplexes and demultiplexes 40 DWDM wavelengths of 100GHz...
$980.00
96 channels DWDM MUX DEMUX CH15-CH62 Dual Fiber AAWG Passive 2U 19'' Racks
The core of a DWDM application is the passive MUX DEMUX unit. DWDM stands for Dense Wavelength Division Multiplexing and allows for very high concentration of channels on a single fiber circuit. The 96 channels DWDM Mux Demux is a...
$2,827.00
8 channel CWDM Mux Demux LGX Module LC/UPC Dual Fiber
CWDM Mux Demux is a flexible, low-cost solution that enables the expansion of existing fiber capacity. The CWDM stands for Coarse Wavelength Division Multiplexing which is defined by with CWDM ITU Grid G.694.2 with listing 18 wavelengths from 1270nm to...
from $175.00
2U Rack Chasis for 200G/400G CFP2 Muxponder
Ultra large capacity and Ultra high density 2U Rack Chassis and modular design, configuration on demand, smooth upgrade. The AC/DC power supply and fan are modular in design, support hot swapping, all can be flexibly replaced. On this compact 2U platform, it can...
$1,959.00
4x 100G QSFP28 to 2x 200G CFP2 Muxponder
This 200G CFP2 muxponder provides a high-quality solution for solving transmission lines with insufficient fiber resources and high fiber line loss. Our 200G CFP2 muxponder can realize the wavelength tunable of CFP2 coherent optical module and can be converted into...
$2,790.00
8x 100G QSFP28 to 2x 400G CFP2 Muxponder
This 400G CFP2 muxponder provides a high-quality solution for solving transmission lines with insufficient fiber resources and high fiber line loss. It can realize the wavelength tunable of CFP2 coherent optical module and can be converted into DWDM standard wavelength...
$5,290.00
20x 10G SFP+ to 1x 200G CFP2 Muxponder
This 100G/200G CFP muxponders provide a high-quality solutions for transmissions such as insufficient margins of the existing systems and long optical cable transmission distances. It is a 12 channels 10G or 24 channels 10G Ethernet signal aggregation to meet the...
$2,590.00